Упрощенная HTML-версия
24
DMX 512
24V PWM
TRS
A
B
To-be-fixed supports and recessing
box in extruded anodized EN AW-
6060 aluminium housing (copper
free) with high corrosion resistance.
Extruded polycarbonate diffuser 3mm
thick.
Luminaire hard wired with H05RN-F
single cable.
Fixing bases and recessing box
included.
Fast connector IP68 included.
LED versions supplied with LED
circuit 24V d.c., power supply not
included.
GLOW WIRE TEST: 850°C
IP67
CLASS III
IK 09
The recessing box must be placed at
ground level.
20 cm drainage gravel or drainage
pipe must be used under the
recessing box to allow easy water
evacuation.
Connection to the main line has to be
done into junction boxes.
Maximun weight 500 Kg
Anodized aluminium (code 13)
COLOUR:
REMOTE POWER SUPPLY
(NOT DIMMABLE) 100W
240V/24V d.c.
for the connection of max 5 fittings
Dimensions 240x40x30mm
IP66
CONTINUOUS LINE
REMOTE BOX NOT DIMMABLE
POWER SUPPLY 100W
240V/24V d.c.
5 Exit
Dimensions 260x260x100mm
IP55
Simes Headquarter, CorteFranca, Italy © Gianattilio Valli / Simes
REMOTE BOX RGB DMX
100W (33W for 3 channels) 240V/24V PWM
DMX address included
controlled by DMX (type S.3493) protocol
Dimensions 260x260x100mm
IP55
DIMMABLE REMOTE POWER SUPPLY
1-10V 40W
240V/24V d.c.
Dimensions 145x47x30mm
IP20
MAX 5 FITTINGS
MAX 10 m (cable 2x1mm²) from TRS
The wiring is external to the housing and
each fitting must be directly connected
to a transformer that can power up to a
maxiumum of 5 fittings. The maximum
distance between the transformer and the
further fitting must not exceed 10 meters
(cable 2x1mm²).
REMOTE CONTROL UNIT
It allows the wireless connection via
radio waves between the controller
(A)
and the control unit
(B)
.
Hence the controller
(A)
becomes
portable.
IP20
DMX CONTROLLER SET
This DMX system includes a controller
(A)
and a control unit
(B)
.
The controller has a wall fixed base
wired to the control unit.
IP20
S.3413
S.3420
S.3407
S.3402
S.3493
S.3494